KIRSTEN K710ASC
STRIPPER / CRIMPER |
- The K700ASC but with pneumatic stripping and cable clamp
- Left or rear feed terminals
- Single, double or in-line banded terminals
- 30 to 11 AWG wire (0.05 - 4.0mm sq.)
- Crimps all terminal manufacturers open barrel terminals
- Maximum strip length for all wire types is 12mm (.5")
- 20 KN crimp force
- Minimum outer jacket cable strip 25mm (1") optional 17mm (.66")
- Wire is clamped and does not move in process
- Crimp mechanism closes from top and bottom
- Sensor operated
- Strips/Crimps in less than 1 second
- Uses UNI-C mini applicator style 1 pc. crimp mechanism
- Accepts other manufacturers mini-applicators e.g. AMP, MOLEX
- Quiet compact design
|
|
MAKFIL TS200
CUT & STRIP MACHINE |
- Microprocessor, hydealic and pneumatic controlled 110 volt system
- Wire diameter .039" - .629" (1mm to 16mm)
- Flat cable width up to 2.36" (60mm)
- Operates in 1 mm increments
- lehdth programable from 1mm - 99,999mm (.039" - 328')
- Stripping length from 3mm - 340mm (.118" - 13.38") standard
- Stripping length from 3mm - 99,999mm (.118" - 328') optional
- Length measuring system by means of encoder
- Transport speed 4 meters/second or 13 feet/second
- Cuts and strips ribbon or flat cable, multi-conductor round cable, discrete wire with all types of insulation
- Precise wire stripping is guaranteed by a unique hydralic control unit
- Cuts and strips outer jacket and inner conductor insulation for 1, 2, or 3 core multi-conductor cable at the same time
- Setting for 1 - 9,999 pieces
|
|
