 |
 |
PLIERS
- CUTTERS
- PREFORMING WITH CURL
- PREFORMING T0220
- PREFORMING AT 90 DEG
|
| CUTTERS |
 |
| PREFORMING WITH CURL |
 |
| PREFORMING T0220 |
 |
PN5050/6 |
Specially designed tool that enables TO220 component leads to be bent 90 degrees, in such a way that the center lead will be 2.5mm longer than the side leads. |
| PREFORMING AT 90 DEG |
 |
 |
AUTOMATIC FORMING TOOL
- HAND OPERATED, ADJUSTABLE, U-FORM FOR AXIAL COMPONENTS
- ADJUSTABLE PITCH FROM 12 TO 50MM
- MAX. BODY DIAMETER: 20MM
- MAX. LEAD DIAMETER: 0.8MM
|
IC Tools
 |
|
Pins aligner
Pins aligner suitable for integrated curcuits MOS and CMOS, from4 to 64 pins.
Operation is made easy by sliding the packaging tube between the 4 metal rollers.
Easy adjustment of the pitch by means of the setting knob.
Setting of the pin distance: from 0.3" to 0.9" (7-24mm)
7804.711: Pins aligner
|
 |
|
IC dispenser
Molded in conductive polypropylene, they are ideal for use in an ESD work station.
Each gravity fed module is equipped with an adjustable tongue allowing easy feeding of the components.
7804.703: 3 way IC dispenser, pitch 0.3" (7.62mm)
7804.705: 5 way IC dispenser, pitch 0.3" (7.62mm)
7804.707: 10 way IC dispenser, pitch 0.3" (7.62mm)
|
 |
|
IC dispenser
It is a professional hand-held pick and place unit for the handling
of small and fragile components (SMD and others).
Micropic is a lightweight and ergonomically shaped ESD safe pen, absolutely
self-sufficient, without needing of tube or cable connections. It consists of two sections:
"vacuum module" and "energy module" simply plugged together. The unique Micro
Vane Pump produces a vacuum for picking up the components. A filter fitted in the tip protects
the pump from dust particles. The energy module can be easily separated
from the vacuum module and replaced by the reserve energy module. Reserve energy modules can
be stored in the recharge position on the tool rack. At the front of the rack, there are locations
for four pick up nozzles. Micropic is designed to be held vertically with pick nozzle in place.
The switch, conveniently located at the front of the vacuum module, allows the vacuum to be switched
on for pick up and switched off for placement.
Weight: only 80g, tip included Suction power: up to 250g (with a suction cup 20mm diameter)
7915.751: Micropic kit (pen, vacuum and energy modules(two), unit with electronic control charger,
5 tips, 3 suction cups) and power adapter 110V 50-60Hz
|
TOMKEN INDUSTRIES, INC.
Phone: 203/847-8867 Fax: 203/847-5320
HOME PAGE |
PREVIOUS PAGE
|