 |
Pins aligner
Pins aligner suitable for integrated curcuits MOS and CMOS, from4 to 64 pins.
Operation is made easy by sliding the packaging tube between the 4 metal rollers.
Easy adjustment of the pitch by means of the setting knob.
Setting of the pin distance: from 0.3" to 0.9" (7-24mm)
7804.711: Pins aligner
|
 |
MICROPIC
It is a professional hand-held pick and place unit for the handling
of small and fragile components (SMD and others).
Micropic is a lightweight and ergonomically shaped ESD safe pen, absolutely
self-sufficient, without needing of tube or cable connections. It consists of two sections:
"vacuum module" and "energy module" simply plugged together. The unique Micro
Vane Pump produces a vacuum for picking up the components. A filter fitted in the tip protects
the pump from dust particles. The energy module can be easily separated
from the vacuum module and replaced by the reserve energy module. Reserve energy modules can
be stored in the recharge position on the tool rack. At the front of the rack, there are locations
for four pick up nozzles. Micropic is designed to be held vertically with pick nozzle in place.
The switch, conveniently located at the front of the vacuum module, allows the vacuum to be switched
on for pick up and switched off for placement.
Weight: only 80g, tip included
Suction power: up to 250g (with a suction cup 20mm diameter)
7915.751: Micropic kit (pen, vacuum and energy modules(two), unit with electronic control charger,
5 tips, 3 suction cups) and power adapter 110V 50-60Hz
|
| |
ANTI-STATIC MOS & CMOS DISPENSERS
|
 |
The
new ZB series of universal DIP IC dispensers cater for MOS and CMOS, as
well as standard devices. Dispensers are available in 1, 2 and 3 tiers
assemblies. Two types of electro-conductive tube guides are available-modules
03 and 06-(module 03 for DIP IC with 0.3" and 0.4" pitch/module 06 for
0.6" pitch), and each dispenser backing plate may be fitted with either
or both modules. These tube guides are interchangeable, allowing unlimited
versatility in lane mix within the dispenser. Each module is equipped
with an adjustable discharge breech which positions each IC individually
for easy extraction and simple gravity feed assures reliable deposit of
next package to it's extraction position. Guaranteed effective dissipation
as well as long and reliable performance.
|
Technical
Specifications
Capacity:
Fixed Stand Single Tier:
STAND 3/7 Cat No.540: 7 lanes of 03 modules
3 lanes of 06 modules
or
mixture of both.
STAND 5/11 Cat No.541: 11 lanes of 03 modules
5 lanes of 06 modules
or mixture of both.
Multi-Layer Stands:
STAND 10/20 Single-Tier Cat.No.54201:
STAND 20/40 Two-Tier Cat.No.54202
STAND 30/60 Three-Tier Cat.No.54203
Capacity per Tier: 20 lanes of 03 modules
10 lanes of 06 modules
or mixture of both. |
| |
'NN' PCB ASSEMBLY JIGS
|
 |
A lightweight PCB assembly jig suitable for use on
flow line production.
Bench mounted base and removable top frame. Has various angular positions for operators comfort. Spring loaded PCB holding channels for fast and easy loading. Top frame can be easily
removed from it's base and passed on to the next station.
Three
different sizes are available.
|
Technical
Specifications
Maximum Board Capacity:
NN 1 - Cat.No.61405 - 255 x 350mm
NN 2 - Cat.No.61406 - 255 x 510mm
NN 3 - Cat.No.61407 - 400
x 625mm |
