 |
|
The Electric Crimp- Press 1500 is an extremely versatile crimp machine for loose individual terminals (contacts), with parallelly closing jaws and adjustable crimp height.
- When equipped with exchangeable tool holders, all standard matrices (cores) of common hand crimp tools (pincers) can be inserted and used for crimping.
- When equipped with a table support and the corresponding press sets, flatband connectors can be pressed onto flat band cables (insulation displacement).
- When equipped with a cable cutter, Cu-cables of up to 50 mm2 can be cut.
- When equipped with the respective tool holders, all telephone plugs RJ-45, RJ-22, RJ-11 and MMJ in screened and unscreened executions can be processed in an economic way.
|
|
- Parallel pressing, due to "toggle press" principle, ensures optimum press fit.
- Adjustable parallelism of jaws.
- Fast cycle time allows aprox. 800 pieces per hour.
- Return to clear machine or to do adjustments in step mode.
- Foot pedal switch with protection cover.
- Rapid tool change, tool-specific finger protection.
- Limitation of return stroke, important when processing flatband connectors.
|
Technical Data:
| Cycle |
< 1 second |
| Stroke |
20 mm (3/4") |
| Press force |
1500 N, 3 mm before lower dead point |
| Electrical data |
230 V / 50 Hz or 115V / 60 cycles |
| Motor |
24 V / 130 W |
| Counter |
5 digits, electronical, zero button |
| Adjustment of lower dead point |
5 mm |
| Weight |
23 kg (51 lbs) |
| Dimensions (height x width x depth) |
350 x 210 x 255 mm (14 x 81/4 x 10") |
| Typical cross section |
< 10 mm2 |
|
